Image Quality Configuration Url; Camera Control Configuration Url - Vivotek NetworKam IP2111 User Manual

Image quality configuration URL

URL: /cgi-bin/image.cgi
NAME VALUE
brightness <-5 ~ 5>
contrast <-5 ~ 5>
hue <-5 ~ 5>
saturation <-5 ~ 5>
preview <not required>
restore <not required>
save <not required>

Camera control configuration URL

URL: /cgi-bin/serial1.cgi
NAME VALUE
interface RS232
<other than RS232>
camctrl yes
no
baud <integer>
data <integer>
stop 1
2 <other than 1>
parity None
Odd
Even
up <text string shorter than 80 characters> tilt up command string of COM1
down <text string shorter than 80 characters> tilt down command string of COM1
left <text string shorter than 80 characters> pan left command string of COM1
right <text string shorter than 80 characters> pan right command string of COM1
home <text string shorter than 80 characters> home command string of COM1
DESCRIPTION
adjust brightness of image
adjust contrast of image
adjust hue of image
adjust saturation of image
not save the parameters
recall the original settings
save the parameters
DESCRIPTION
switch COM1 to RS232
switch COM1 to RS485
enable camera control
disable camera control
set baud rate of COM1
set data bits of COM1
set 1 stop bit of COM1
set 2 stop bits of COM1
set parity check of COM1 to none
set parity check of COM1 to odd
set parity check of COM1 to even
85
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097