Vivitar VIVICAM T030 User Manual page 10

2) Make sure an SD card has been inserted into your camera.
3) Press the POWER
Setting the Camera Language
1) You will first be prompted to select a language for the camera. The Language selection menu
will appear. Select the language of your choice and press the SET button to confirm the
selection.
2) After selecting a language, you will be asked if you would like to continue with the initial
camera setup. A message will appear: "Continue with Camera Setup?" Select "Yes" to
continue or "No" to exit the setup.
Note: If you select "No" and decide to leave the camera setup, the camera will be set to its default
settings. These settings can be adjusted at any time manually through the menus in the camera.
Setting the Date and Time
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as Desired and press the SET button to confirm the selection and move to
the next part of the camera setup.
button to turn on the camera.
9