Camera Mode - Vivitar VIVICAM T024 User Manual

2. Press the MODE button to toggle between the 3 modes.
3. The Camera mode will have an
have an icon and the Playback mode a

Camera Mode

This is the default mode when turning on your camera.
Taking Photos
1. Compose your shot using the LCD screen.
2. Hold the camera steady and press the Shutter button to take the photo.
3. There will be a short delay while the camera saves the JPEG photo to memory.
After each photo is taken (when the camera returns to icon mode) the numbers of photos left to shoot at
the selected resolution is displayed on the top right of the LCD screen.

When the camera's memory (photo capacity) is full, the LCD screen will display a message -
"Memory Full, Insert a SD memory card to Transfer and Take More Photos!"

Either download the photo to your computer using the Vivitar Experience Image Manager software
as described below in the section "Transfer photos and videos to your computer" and
icon in the top left corner of the LCD screen. The Video mode will
icon will appear in the top left corner of the screen.
9