Kohler ESCALE K-25089T-S Installation Instructions Manual page 14

2. Tighten the long screw into the holes of the tank bracket
and cover the drainage hole with the big cap, cover the
inlet hole with the small cap.
2.
3. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
3.
1.
2.
4. According to different faceplates,there are different
installations of access panel as below.
4.
1) K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
Access Panel Installation Methods:
There are four ways to install access panel:
Method one: Press from top
Method two: Remote plate installation: fix four plates
with screws
Method three: Remote installation of mask
Method four: Press from front: fix four plates with screws
1) K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
1402749-T01-A
Drainage Hole
Connecting Pipe
Water Pipe
Method one:
Press from top
:
Method three:
Remote installation of mask
Suggested faceplate
installation area
R1000mm
-8-
Inlet Hole
Big Cap
Method two:
Remote plate installation
Suggested faceplate
installation area
R1000mm
Air hose
Method four:
Press from front
Air hose
Air hose
Tank Bracket
Small Cap
Long Screw
Pinch
plate
Pinch plate
Finished
wall
Suggested/
80 3