Protecting One Image/Video Clip; Removing Protection From One Image/Video Clip - Vivitar Vivicam 3715 User Manual

Protecting one image/video clip

You can protect the image/video clip you prefer from being accidentally erased
by using the protect function in the Playback menu. Follow the steps below to
perform protect function:
Protecting one image/video clip
1.Turn the mode dial to
the camera.
The last image/video clip appears on the
LCD monitor.
2.Select the image/video clip you wish to pro-
tect by using the
3. Press the button. Select Protect by using
the / button.
4. Press the button. Use the
select One image and then press the
button.
To protect all images, select All images
in this step.
5.Select Lock by pressing the
then press OK.
Once the image/video clip is protected,
the protection icon will display on the pro-
tected image/video clip.

Removing protection from one image/video clip

1. Perform the steps above 1 to 4 in "Protecting one image/video clip".
2. Select Unlock by pressing the
• To erase the protected image/video clip, use the format function. For more information about
formatting, refer to Format in the Playback menu.
mode and power on
/ button.
/ button to
/ button and
/ button and then press OK.
E
27