Dpof; Exit - Vivitar V3625 User Manual

DPOF

DPOF allows you to embed printing information on your memory card. Using DPOF
you can select an image to be printed and then specify how many prints to you
would like. Take your memory card to a DPOF enabled printer that accepts SD
memory cards. The DPOF/card-compatible printer will read the embedded infor-
mation on the memory card and print your images as specified.
To use DPOF, first press the OK button to enter the DPOF sub-menu. Use the
button to set the values for each field and then press the OK button.
[PRINT QUANTITY] : Select image quantity from 1~9
[PRINT SIZE]
[PRINT INDEX]
[PRINT ENABLE]
E
DPOF shortcut
You can use the shutter button to quickly establish DPOF settings, as follows:
1. Turn the mode dial to the
2. Press the shutter button to toggle the DPOF print tag setting for the specified
image.
NOTE
• When using the shutter button to enable the DPOF setting, the default setting is size=standard,
and quantity=1.

EXIT

This option exits the record menu and then returns to the
button to exit. You can also press the
40
: Select your preferred image size
(standard, 3x5, 4x6, 5x7, 8x10)
: allows you to print the images in index format
: If you select ENABLE, the camera will save the DPOF
settings. If DISABLE is selected, all the settings will be
erased.
mode.
mode. Press the OK
button again to exit.
/