Initial Camera Setup - Vivitar ViviCam T327 User Manual

Initial Camera Setup

Installing the Battery
To Charge the Battery:

Insert the battery as shown above.
Make sure the polarity is correct.

Power off the camera.

Connect the camera with the USB cable
either to the AC charger or to the
computer.

Charge light will turn off when battery is
fully charged.
Turning On the Camera
+ -
Installing the Memory Card
Using the Camera
4

SD Memory card
(up to 32GB)
needed for normal use.

Insert as shown above
until a click is heard.
Accessing
the menu
Selecting
the modes