Initial Camera Setup - Vivitar ViviCam F529 User Manual

Initial Camera Setup

Installing the Batteries
Turning On the Camera
When powering the camera ON for the first time the camera will take you through the initial
camera setup.
Powering the Camera ON
1) Make sure the batteries have been inserted properly into your digital camera.
2) Make sure an SD card has been inserted into your camera.
3) Press the POWER button to turn on the camera.
4
Installing the Memory Card
 SD Memory card
(up to 32GB)
needed for normal use
(not included)
Using the Camera
Accessing the menu
Selecting
the modes