Function Selection - Homemaker MY-12LS605A Manual

Function Selection

General Functions
1.Refer to display setting instructions on Page 4
2.Switch on
The LED flashes and displays a red horizontal
line "---", indicating that the electric pressure cooker
has entered preparation state;
3.Select a required function level
Once a function key is pressed, the indicator of a corresponding
function level will illuminate (red);
Cooking time varies with different function level. The bigger the
food amount, the longer the cooking time. The cooking times listed
in the table below are only for reference
(e.g. food amount + water = 8 scales): Cooking time = heating time + holdup time
Functions Default hold-up time
Pot Roast
Soup
Slow cook
4 H (the whole working time)
Sauté 20 min (the whole working time)
Brown Rice
White Rice
Note:
To "Pot Roast, Soup, Brown Rice, White Rice", after select these functions selection, press
"Start/Cancel"key, product begins to operate and the horizontal line"---"on the display screen will light.
After a period, it will start to countdown the default cooking time. When the countdown time is
completed it will display "OH" which means it is in keep warm mode after cooking.
When"Slow cook, Sauté" function is selected, product begins to operate and the default cooking
time will start to countdown at the same time, the time displayed is the whole working time for this
selection. When the countdown time is completed on "slow cooking mode" it will display "OH" which
means it is in keep warm mode after cooking. On "Saute" mode "---"on the display means the product
is on standby (it does not go into keep warm function automatically on "Saute" mode).
4. Press a function key and "Start/Cancel" key, the electric pressure cooker will perform a corresponding function
program selected.
Before pressing the "
press the "Start/Cancel" button to sart the pressure cooker.
The red horizontal line --- on the display screen will light, indicating that the electric pressure cooker
has entered working state.
During oparetion, you can cancel current working state and return to standby state by pressing
the "Start/Cancel"key.
5. After cooking, enter the warm-keeping state automatically
After cooking, a corresponding function indicator goes out, the keep warm indictor illuminates , the
display screen shows "0H", and gives out the prompt sound (10 beeps). This indicates the pressure
cooker is going into keep warm state.
In standby mode, press the "Keep warm" key, the warm indictor illuminates, and gives out the prompt
sound (1 beep), indicating that the electric pressure cooker goes into keep warm state.
Remark : Before pressing "Start/Cancel" key, please make sure the exhaust valve position is NOT at
" ", otherwise pressure cannot build up, food cannot cook properly(Refer to Product Diagram on
page 3 to identify the location of the exhaust valve).
Temperature
30 min
around 115℃
around 115℃
35 min
around 95℃
around 155℃
around 120℃
35 min
11~17 min around 120℃
Start/Cancel key, you can re-select preset time and function level, and then "
" "
Warm Tips:
In any mode, you can cancel current
working state and return to standby state by
pressing the "Start/Cancel" key.
During operation, the machine may
sometimes generate the "cluck" sound,
which is not malfunction.
Preset
2~24H
2~24H
N
N
2~24H
2~24H
05
Ending state
Countdown
OH
30 min
OH
35 min
4 H
OH
---
20 min
OH
35 min
OH
11~17 min