Moving The Patient - Invacare RPS350-1 Owner's Operating And Maintenance Manual

Stand up lift

Hide thumbs Also See for RPS350-1:

Table of Contents

STEP 1A

STEP

2 E

2 A

2 B

STEP 3

STEP 4

FIGURE 1 - LIFTING THE PATIENT

MOVING THE PATIENT (FIGURE 2)

STEP 1B

STANDING SLINGS - DO NOT use the standing sling

in combination with the stand up lift as a transport

device. It is intended to transfer an individual from

one resting surface to another (such as a bed to

a wheelchair). Moving a person using the stand-

ing sling in combination with the stand up lift over

ANY distance is NOT recommended.

During transfer, with patient suspended in a sling

attached to the lift, DO NOT roll stand up lift over

objects such as carpet, raised carpet bindings,

door frames, or any uneven surfaces or obstacles

that would create an imbalance of the stand up

lift and could cause the stand up lift to tip over.

Use push handle on the mast at ALL times to push

or pull the stand up lift.

1. Using the push handle, move the stand up lift away

2. SLOWLY, move the patient to the desired surface.

3. Lower the patient onto the desired surface. Refer to

STEP

2 D

2 C

STEP 1

TRANSFERRING FROM

WARNING

from the surface.

TRANSFERRING TO in this manual.

FIGURE 2 - MOVING THE PATIENT

Table of Contents