Table of Contents
Advertisement
Basic
O_eration
Basic Operation
Power on/off
1. Connect
to the power with a mains cable and an adaptor (page9).
2.-To turn on the TV
Press POWER
button on the TV or remote control.
-To turn off the TV
Press POWER
button on the TV or remote control.
Input Source
select
Press INPUT button on the TV set or remote control to display the input
source menu, and use CH+/- button on the TV set or A / V button on
remote control to select the input source, press OK button on the
remote control to enter.
Note: Before
you select
the input
source,
make sure the
connections
are prepared.
Basic buttons
on the remote
control
POWER(red
button): Turn the TV on/standby.
INPUT:
Press to display the input source menu.
Number
Buttons:
Choose channel directly.
Select channel
5, Press button "5";
Select channel
62, Press button "6", then press button "2" in 2 seconds;
Select channel
151, Press button "1", and press button "5" in 2 seconds,
and press button "1" in
2 seconds;
Select channel
5-1, Press button "5", and press button "- / - -" in 2 seconds,
and press button "1"
in 2 seconds;
C_--_ (RETURN):
Return to the previous
channel viewed.
PICTURE:
Press repeatedly
to cycle through the available
video picture modes.
SOUND:
Press to cycle through the different
sound settings.
SLEEP:
Shutdown
timer.
DISPLAY:
Display the information
of current mode.
VOL+/-:
Press to adjust the volume.
CH+/-: Press to scan through channels.
MUTE: Press to mute the sound, press again or press VOL+ to unmute.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
Thumbstick(<
> AV
): Allows you to navigate the on-screen
menus and adjust the system
settings to your preference.
OK: CONFIRM
button.
12
Advertisement
Table of Contents
