Contents Caution Caution Safety Information Unit and Accessory Product Feature information Getting Started-Front View Getting Started-Rear View Remote Remote Control Key Functions control 8-10 Basic operation 10-11 Picture menu options 11-12 Sound menu options 12-13 Channel menu options Menu 13-15 Settings menu options operation Settings menu options in VGA/PC...
Page 6
• Built-in progressive scan DVD player • iPod Dock for playback of music and video from iPod • Integrated ATSC/NTSC/QAM TV tuner • Integrated 3-in-1 Card Reader (SD, MS, MMC) and USB Port for playing digital media files • HDMI input for true digital connection •...
Page 7
CAUTION: A sensitive low-frequency speaker (woofer) is located on the underside of this multimedia TV. Please remove the protective film covering the woofer before use. Please take care when handling the unit by the base – do not press on or damage woofer.
Page 8
10. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal. Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket(NOT SUPPLIED). Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the base mounting bracket).
Page 9
INPUT Press to cycle through the input source. NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV. Then press “OK” key to confirm. Press this button to enter a program number for multiple program channel such as 2-1,etc.
Page 10
INPUT -/-- PICTURE SOUND SLEEP DISPLAY NOW PLAYING VOL+ MUTE VOL- EXIT MENU AUDIO ONLY MENU SETUP SHUFFLE LANGUAGE ZOOM SUBTITLE SLOW MENU ANGLE TITLE GOTO REPEAT PROGRAM INTRO REPEAT Note: Buttons labeled in yellow are for controlling iPod-specific functions Press to display the closed caption.
Page 11
Press the POWER button on TV or on the remote control to enter standby mode. The indicator is red. NOTE: If this is the first time you run the LCD TV, the Initial Setup Menu will appear in the picture, and the items of this menu also exist in other menus, so you are able to change the values after you set them up.
- Use / OK buttons to operate the available menus. 1. Using the CH+/CH- button on the TV set or on the remote control. - Press CH+ button to increase channel number. - Press CH- button to decrease channel number.
You can select the input source by pressing the INPUT button on the remote control or on the TV set. Picture menu options Press the MENU button, and use Picture Mode Select the type of picture which best corresponds to your viewing requirements by selecting picture mode in Picture menu.
3D/YC on/off. Gradient Enable: Press OK/ Blue Screen: Press OK/ If the function is turned on, the TV will display blue screen when there’s no signal. Sound menu options Press the MENU button, and use Sound Mode Select the Sound mode in Sound menu.
Page 15
Advanced Audio Press button to select and press OK/ Audio Only: Press OK / power 3 sec. to restore. Channels menu options Press the MENU button, and use Tuning Band Select Tuning Band mode.(Available tuning band mode: Air/Cable) If select Air, the range of channel is 2-69, and if select Cable, the range of channel is 1-135. Auto Channel Search Press the OK / button on the item to start Auto Channel Search.
Manual Add Channel When the channels are found, use OK button to add it to the channel list. Manual Channel Set Press OK button to display a channel list that you can select channel as below: Favorite Channels Press OK button to display the channel list that you can select channel as below: Channel Labels Allows you to name the channel that is selected.
Page 17
Time Set Menu as below that allows you button to select the time set mode from AUTO and MANUAL. button to select the time zone for your TV. button to set advanced rating on/off. button to enter the Advanced...
Page 18
Language: To select language of the OSD. Transparency: To select the transparency of the OSD. Sleep Timer: Press OK / button to select the number of minutes to set your TV sleeps automatically. Reset Press button to select and press OK / button to enter the Closed Caption.
Settings menu options in Select input source “VGA/PC”. Press the MENU button, and use PC Setting Press button to select PC Setting, then press OK / Horizontal Position: Press adjust the horizontal position of the picture. Vertical Position: Press the vertical position of the picture. Phase: Press button to select and press OK / of the picture.
Settings menu options in Select input source “Component”. Press the MENU button, and use Component Set Press button to select Component Set, then press OK / menu. Horizontal Position: Press adjust the horizontal position of the picture. Vertical Position: Press the vertical position of the picture.
Page 21
TV-PG, TV-14, or TV-MA rated programming.) Do you want to block the auxiliary video source entirely? (Blocks the signal sent by the equipment, such as a VCR, connected to the TV Audio/Video input jacks) Or leave unblocked, then choose allowable ratings.
When connecting an iPod to this iPod Dock, please ensure that the correct adapter plate is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod. NOTE: A docked iPod will charge when the TV is powered ON. When the TV is in standby mode the iPod will not charge.
Page 23
REPEAT : Press to toggle between Manual Mode and iPod Mode - iPod Mode: TV displays iPod menu. iPod is controlled via menu. - Manual Mode: TV does not display iPod menu. Most iPod functions are controlled using control keys on iPod.
Page 24
iPod Operation 3) Getting Started – Playing Music and Videos Main iPod menu NOTES: Playing Music Music Playlists Artists Browse and play songs Browse and play videos Select next song/video according to Shuffle settings Access advanced settings Access currently playing song or video Music Menu Now Playing Screen...
Page 25
Video from the main iPod Menu and press OK. The Video Menu is displayed as below. Movies, TV Shows etc, chose the series or movie you wish to watch. Press OK and playback begins. The Now Playing Screen is displayed.
Page 26
iPod Operation Now Playing Screen – Video Playback The Now Playing Screen gives you at-a-glance information about the video you are viewing. The playback information bar shown at the bottom of the screen is the same as for music playback and is described in detail above.
Page 27
TV Out settings are usually located in the “Slideshow Settings” menu of your iPod. For best viewing, set the TV out format to “Widescreen” if available or set the TV aspect ratio to “Normal” for viewing 4:3 photos. manual for details.
DVD Operation DVD Basic Operation Turn on your TV then use the INPUT button on the remote control or on the TV to select DVD mode. If there is no disc in the DVD players the screen will show “NO DISC”.
Subtitles 1. Compatible with DVD, SVCD discs. 2. Press the Subtitle button on the remote once, and the subtitle info banner appears 3. When a DVD or SVCD is recorded with subtitles, you can use the Subtitle feature to view the subtitles on-screen.
1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be shown as below. 2. Press the button to select the Icon of the desired section, e.g. “TV System" and press button to open that section. 3. Press to select the desired feature and again press 4.
Page 31
"0000". Using the button, move the highlight to "PASSWORD", press enter "0000". You will see the padlock symbol open. You may now change the RATING or put in a new password number. If the Lock symbol is BLUE you must press Please remember or write down the new Password and keep safe.
- The following files formats are supported by this TV: JPG, MP3, WMA, MP4 (DivX3.11-5.11, Xvid), MPEG1 (DAT, MPG, MPEG), MPEG2 (mpeg, mpg). - File formats including the following are not supported by this TV: BMP, PNG, AAC, DivX 6, DivX HD, Vob, ts.
Page 33
Playing Flash Media 3) Play the Music, Video or view the Photos 3 4 5 (3) - Music, (4) - Photo (5) - Movie (1). (2). NOTE: STOP...
Pull the plug out, wait for 60 seconds, then reconnect the power and run the set Check the antenna connection. Try other TV channel due to the TV station problem. Modify the brightness or contrast setting. Increase the volume. Check that if the set is on the mute state or not.
Technical Specification LCD Panel Input Connector Power Source Power Consumption improving the performance. Panel Size Brightness Contrast Resolution Video S-Video Audio(L/R) PC Audio HDMI YPbPr Technical Specification 22 inch(diagonal) 300 cd/m 800:1 1366X768 AC100-240V 50/60Hz...
Page 39
VIORE or VIORE's authorized service center. VIORE will repair or if repairs cannot be made, VIORE will replace this Product at no charge if the Product is defective as specified in this limited warranty during the limited warranty period.