Channel Menu - VIORE LED22VF50 Operating Instructions Manual

3.4 Menu Settings
You can adjust Menu Settings here.
Press to select, press
to exit.
Transparency
Menu Language
Adjust
3.5 VGA Settings: In PC Mode is available.
Press button to select VGA Settings ,Press
button, the screen will display as follow:
H-pos
V-pos
Clock
Phase
Auto
Adjust
1).H-Pos:Adjust the horizontal position of the screen.
2).V-Pos:Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
5).Auto: Auto adjust to fit the screen.

4. Channel MENU

The fourth item of the MENU is Channel MENU.
You can adjust digital and analoge TV Channel .
Press to select, press
Air/cable
Auto Scan
Favorite
Show/Hide
Channel NO.
Channel Lable .
DTV signal:
Adjust
to adjust, press MENU
< >
25%
< >
English
Select Menu Exit
50
50
50
50
>
Select Menu Exit
to adjust.
< >
Air
>
>
>
< >
2-1
>
Good
Select Menu Exit
1). Air/Cable: select Air TV signal and cable TV signal.
2). Auto Scan: If it's the first time you use the TV, you
should scan all the TV channels first,
press the button to confirm, you will see below
menu :
Adjust
select"yes"item and press the ENTER button to
confirm, you will see below menu which indicates
auto search is in process.
Adjust
3). Favorite: Press
favorite channel .
4). Show/Hide: Press
currently channel.
5). Channel NO . :Display the currently channel number.
6). Channel lable: Press
channel name.
7). DTV signal: Display DTV signal intension. It can't be
selected and adjusted.
-14-
OPERATION
Are you sure?
NO YES
Press"ENTER"Key To Select
Menu Exit
Select
R F CH: 4
Found: 4
Analog: 1
Digital: 3
Select Menu Exit
button to choose/delete the
button to display or hide
button to edit currently