Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DJS131
Summary of Contents for Makita DJS131
- Page 1 INSTRUCTION MANUAL Cordless Metal Shear DJS131 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DJS131 Max. cutting capacities * Steel up to 400 N/mm 1.3 mm (18 ga) Stainless Steel up to 600 N/mm 1.0 mm (20 ga) Strokes per minute 0 - 3,000 min Overall length 332 mm Rated voltage D.C. 18 V Net weight 2.0 - 2.3 kg... - Page 3 Avoid body contact with earthed or grounded Always wear protective goggles to protect surfaces, such as pipes, radiators, ranges and your eyes from injury when using power tools. refrigerators. There is an increased risk of elec- The goggles must comply with ANSI Z87.1 in the USA, EN 166 in Europe, or AS/NZS 1336 tric shock if your body is earthed or grounded.
- Page 4 When using the tool, do not wear cloth work Always be sure you have a firm footing. gloves which may be entangled. The entangle- Be sure no one is below when using the tool in high locations. ment of cloth work gloves in the moving parts may result in personal injury. Do not touch the blade or the workpiece imme- diately after operation. They may be extremely Battery tool use and care hot and cause burn your skin.
-
Page 5: Functional Description
18. Keep the battery away from children. SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting ► 1 . Red indicator 2. Button 3. Battery cartridge causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. -
Page 6: Overheat Protection
Overheat protection Indicating the remaining battery capacity When the tool or battery is overheated, the tool stops Only for battery cartridges with the indicator automatically and the lamp blinks. In this case, let the tool and battery cool before turning the tool on again. Overdischarge protection This protection works when the remaining battery capacity gets low. In this situation, remove the battery from the tool and charge the battery. Switch action CAUTION: Before installing the battery car- tridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF"... - Page 7 Removing shear blades Lighting the lamp NOTICE: Hold the blades and the sleeve not to fall CAUTION: Do not look in the light or see the from the cutting head. source of light directly. NOTICE: Be careful not to lose the sleeve. To turn on the lamp, slightly pull the switch trigger, and Remove the bolts which hold the blades.
-
Page 8: Operation
Installing cutting head OPERATION CAUTION: Secure the cutting head firmly. Lubrication Otherwise the cutting head may rotate during opera- tion and cause serious injury. NOTICE: Use the standard machine oil for steel Insert the cutting head into the tool by turning it left and or the mineral spirits for aluminum. right alternately. Then tighten the three bolts with the hex wrench (5/32"). Before operation, always lubricate the following areas: The cutting area of the workpiece. The part of the center blade which contacts to the workpiece. -
Page 9: Cutting Operation
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 12 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885783A924 www.makita.com 20200525...