Basic Settings; The Water Softener - Zanussi ZSLN2321 User Manual

For any other questions regarding your dishwasher
please refer to the service book provided with your
appliance.

BASIC SETTINGS

You can configure the appliance by changing basic
settings according to your needs.
Number Settings
1 Water hardness
2 Rinse aid level
3 End sound
4 Auto door open
5 Key tones
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in setting mode.
When the appliance is in setting mode, the
indicators on the control panel represent available
settings. For each setting, a dedicated indicator
flashes:
4
1
Water hardness
German degrees
(°dH)
47 - 50
8
Values
From level 1 to
level 10 (default:
5)
From level 0 to
level 8 (default:
5)
On
Off (default)
On (default)
Off
On (default)
Off
5
3 2
French degrees
(°fH)
84 - 90
Adjust the level of the water softener according
to the water hardness in your area.
Adjust the level of the rinse aid according to the
necessary dosage.
Activate or deactivate the acoustic signal for the
end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the buttons
when pressed.

THE WATER SOFTENER

The water softener removes minerals from the
water supply, which would have a negative effect
on the washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
Clarke de-
mmol/l
grees
8.4 - 9.0 58 - 63
1)
Description
Water softener level
10