Single Disk Processing - Texas Instruments PHP1240 Manual

From this point on. the procedure Is the same as for the Quick Test. Just respond to the
prompts as they appear on the display.
The Comprehensive Test consists of six tests that write to and read from all of the
sectors on the diskette.

Single Disk Processing

Option 4 on the main selection list of the Disk Manager module Is SET ALL
COMMANDS FOR SINGLE DISK PROCESSING. Choose this option If you only have one
disk drive or If you are only going to be using DSK l . After you choose this option. the
message SINGLE DISK PROCESSING HAS BEEN INITIALIZED appears on the screen.
(You may go back to multiple disk operations only by leaving the module and
reentering It.)
Be sure to Insert a diskette Into the disk drive before selecting any other commands.
The prompts MASTER DISK ( 1 -3)? and COpy DISK ( 1 -3)? will automatically be
answered each time you choose an option. and the disk will be accessed Immediately.
28