Replacing the optical-drive interposer
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Steps
1. Align the optical-drive interposer with the slot on the computer base and snap it into place.
2. Follow the procedure from step 1 to step 5 in
Post-requisites
Steps
1. Replace the keyboard.
2. Replace the
wireless
card.
3. Follow the procedure from step 5 to step 7 in
4. Replace the
optical
drive.
5. Replace the
base
cover.
6. Replace the battery.
computer. After working inside your computer, follow the instructions in
"Replacing the computer
base".
"Replacing the hard
drive".
Replacing the optical-drive interposer
22
After
35