GUID-7D3D6B04-3ECE-4E21-8CF6-A1AFBDE2E206
Replacing the optical-drive
interposer
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-C6F8A5A3-0E1D-447A-B2A2-15472E17B739
Procedure
1
Align the screw holes on the optical-drive interposer with the screw holes on the
palm rest and keyboard assembly.
2
Replace the screws that secure the optical-drive interposer to the palm rest and
keyboard assembly.
3
Connect the optical-drive interposer cable to the system board and the optical-
drive interposer.
4
Insert the optical-drive interposer cable into the latch and press the latch down
to secure the cable.
5
Close the latch that secures the optical-drive interposer cable to the system
board.
6
Route the display cable through the routing guide and connect it to the system
board.
GUID-FC885216-4D9B-490B-8E29-934447E8E5D4
Post-requisites
1
Replace the
base
2
Replace the
optical
38
computer. After working inside your computer, follow
After working inside your
cover.
drive.
computer. For more safety best
www.dell.com/
Before