Removing the optical-drive interposer
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Steps
1. Remove the battery.
2. Remove the
base
cover.
3. Remove the
optical
drive.
4. Follow the procedure from step 1 to step 3 in
5. Remove the
wireless
card.
6. Remove the keyboard.
Procedure
Steps
1. Follow the procedure from step 1 to step 5 in
2. Turn the computer base and place it on a flat surface.
3. Lift the optical-drive interposer along with the cable off the computer base.
a. computer base
b. optical-drive interposer
c. optical-drive cable
34
Removing the optical-drive interposer
computer. After working inside your computer, follow the instructions in
"Removing the hard
drive".
"Removing the computer
base".
21
After