Setting The Configuration Jumpers; Hard Disk Drive Configuration Jumper Locations - HP 9000 300 Series Hardware Configuration Manual

6
210 or 420 Mbyte Hard Disk Drives
Setting Configuration Jumpers
Caution
Although the device is well-protected from physical shock
when installed in the controller, it is very easily damaged when
separate. Avoid dropping or striking the device. Handle it
gently at all times.
Note the jumpers in the back of the drive are installed as follows:
• Jumpers installed on pins
=
"in."
• Jumpers removed from pins
=
"out."
Figure 6-2. Hard Disk Drive Configuration Jumper Locations
6-8 Configuring Mass Storage Devices