Installation Instruction - Haier AU242FHBHA Installation Manual

Installation Instruction

Please read these "Safety Precautions" first then accurately execute the installation work.
Though the precautionary points indicated herein are divided under two headings, "WARNING
those points which are related to the strong possibility of an installation done in error resulting in death or serious injury
are listed in the "WARNING" section. However, there is also a possibility of serious consequences in relationship to the
points listed in the "CAUTION"section as well. In either case, important safety related information is indicated, so by all
means, properly observe all that is mentioned,
After completing the installation, along with confirming that no abnormalities were seen from the operation tests, please
explain operating methods as well as maintenance methods to the user (customer) of this equipment, based on the owner's
manual.
Moreover, ask the customer to keep this sheet together with the owner's manual.
Installation by yourself or improper handing could cause such problems as water leakage, electric shock or fire accident.
Execute the installation accurately, based on following the installation manual. Again, improper installations can result in
water leakage, electric shocks and fires.
For installation, confirm that the installation site can sufficiently support heavy weight. The air conditioner cannot be installed
on non-special metal frames (Such as guard net against theft). When strength is insufficient, injury can result from a falling
of the unit.
Execute the prescribe installation construction to prepare for earthquakes and the strong winds of typhoons. Improper
installations can result in accidents due to a violent falling over of the unit.
Accurately connect wiring using proper cable, and insure that the external force of the cable is not conducted to the terminal
connection part, through properly securing it. Improper connection or securing can result in heat generation or fire.
Take care that wiring does not rise upwards and keep the right shape. Properly ground the wiring and let it free from electric
cover or outside plate. Its improper installation can also result in heat generation or fire.
When setting up or moving the location of the air conditioner, do no mix air etc. or anything other than the designated
refrigerant (R22 or R407C) within the refrigeration cycle.
Rupture and injury caused by abnormal high pressure can result from such mixing.
Always use accessory parts and authorized parts for installation construction. Using parts not authorized by this company
can result in water leakage, electric shock, fire and refrigerant leakage.
Do not lead the drainpipe to the waterspout that generates such harmful gas as sulphurous gas, which may enter indoors.
If refrigerant leakage occurs during installation, ventilate at once. Harmful gas may produce if the refrigerant contacts fire.
Make sure no refrigerant gas leakage after installation. If refrigerant gas contacts fire from warmers or furnaces, harmful
gas will produce.
Do not install the unit where there is a concern about leakage of combustible gas. The rare event of leakage gas collecting
around the unit could result in an outbreak of fire.
For the drainpipe, follow the installation manual to insure that it allows proper drainage and thermally insulate it to prevent
condensation. Inadequate plumbing can result in water leakage and water damage to interior items.
Make sure that thermally insulation of gas and liquid piping to keep warm. Inadequate plumbing can result in water leakage
and water damage to interior items.
Grounding must be executed properly. No grounding or inadequate grounding could cause electric shock. Do not connect
the ground wire to a gas pipe, water pipe, lightning rod or a telephone ground wire.
A Circuit breaker must be installed. If not, it may cause electric shocks.
Electrical leakage test is necessary after installation.
WARNING
CAUTION
7
" and "CAUTION ",