Removing The Power Cassette Module From The Cisco Cbr Chassis - Cisco cBR Series Manual
Maintaining the power system
Hide thumbs
Also See for cBR Series:
- Configuration manual (58 pages) ,
- Hardware installation manual (270 pages)
Advertisement
What to do next
Replace the FPEM
(if required).
Removing the Power Cassette Module from the Cisco cBR Chassis
Before you begin
•
Remove the Power
Modules.
• Be aware of the weight and size of the equipment. Handle it with care.
Required Tools and Equipment
• 3/16" flat-blade torque screwdriver
• T10 Torx screwdriver
Procedure
Step 1
Loosen the two screws on the front power entry bezel using a 3/16" flat-blade torque screwdriver. Remove the bezel from
the chassis.
8
Advertisement
