縱橫比 , 自動梯形失真校正 執 Rs-232C; Communications Setting - ViewSonic VS12417 User Manual

RS-232C Communication
RS-232C Communication
 2 3  5
6
8
7 9
CONTROL port
of the projector
Connecting the cable
Turn off the projector and the PC.
.
Connect the CONTROL port of the projector with a RS-232C port of the PC
2.
by a RS-232C cable (cross). Use the cable that fulfills the specification shown
n the prevous page.
Turn the PC on, and after the PC has started up turn the projector on.
3.

Communications setting

19200bps, 8N1
1. Protocol
Consist of header (7 bytes) + command data (6 bytes).
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC flag for command data
CRC_high : Upper byte of CRC flag for command data
3. Command data
Command data chart
byte_0 byte_1
Acton
low hgh
Action (byte_0 - 1)
Acton Classification
 SET
2 GET
 INCREMENT
5 DECREMENT
6 EXECUTE
ViewSonic
RS-232C cable (Cross)
- ()
RD (2)
TD (3)
- ()
GND (5)
- (6)
RTS (7)
CTS (8)
- (9)
byte_2 byte_3
Type
low hgh
Change settng to desred value.
Read projector nternal setup value.
Increment setup value by 1.
Decrement setup value by 1.
Run a command.
() CD
(2) RD
(3) TD
() DTR
(5) GND
(6) DSR
(7) RTS
(8) DTS
(9) RI
byte_4 byte_5
Setting code
low hgh
Content
58
 2 3  5
6
8
7 9
RS-232C port
of the PC
PJL32