Advertisement
I Adjusting the Document Stop Position
4037IXE295DA
4582IXE508DA
4. Touch "Sub Scanning Direction 1-Side."
4582IXE511DA
4582U003AA
1. Display the Service Mode screen.
(For details of how to display the Service
Mode screen, see the Service Manual.)
2. Touch "ADF."
3. Touch "Auto Stop Position Adjustment."
5. Place the chart furnished with the Document
Feeder in the document feeding tray (with
the side having an arrow facing up).
6. Press the Start key.
DF-601
4582IXE512DA
4582IXE513DA
4582IXE514DA
– 4 –
7. Make sure that "Adjustment Result" is "OK."
Then, touch "SET."
8. Touch "Sub Scanning Direction 2-Side."
9. Place the chart furnished with the Document
Feeder in the document feeding tray.
NOTE
Make sure that the blank surface of the
chart faces up.
10. Press the Start key.
11. Check that "Adjustment Result" is "OK" and
then touch "SET."
12. Touch "Main Scanning Direction."
13. Place the chart furnished with the Document
Feeder in the document feeding tray (with
the side having an arrow facing up).
14. Press the Start key.
15. Check that "Adjustment Result" is "OK" and
then touch "SET."
16. Touch "END."
17. Touch "Exit" on the Service Mode screen.
Advertisement
