ViewSonic WR100 User Manual page 52

5
Gateway: the IP address of the gateway device that allows for
contact between the wireless router and the network or host.
6
Interface: Depending on where the Destination IP Address is
located, select LAN & Wireless or Internet (WAN) from the
Interface drop-down menu.
7
To save your changes, click the Apply button. To cancel your
unsaved changes, click the Cancel button.
For additional static routes, repeat steps 1-4.
8
Delete This Entry: to delete a static route entry do the
following.
(1) From the Static Routing drop-down list, select the Entry
Number of the static route.
(2) Click Delete This Entry.
(3) To save a deletion, click Apply button. To cancel a deletion,
click the Cancel button.
9
Show Routing Table: click the Show Routing Table button to
view all of the valid route entries in use. The following fields
appear for each entry. Click the Refresh button to refresh the
data displayed.
Destination LAN IP: the address of the network or host to
which the static route is assigned.
Subnet Mask: this determines which portion of an IP address is
the network portion, and which is the host portion.
ViewSonic Wireless Router 48