ViewSonic WR100 User Manual page 46

4
Select Deny or Allow, depending on how you want to control
access for specific PCs.
5
Click the Edit List button next to PCs or Internet PCs.
(1). On the List of PCs or List of Internet PCs screen, specify
PCs by IP address or MAC address. Enter the
appropriate IP addresses into the IP fields. If you have a
range of IP addresses to filter, complete the appropriate IP
Range fields. Enter the appropriate MAC addresses into
the MAC fields.
(2). Click the Apply button to save your changes. Click the
Cancel button to cancel your unsaved changes. Click the
Close button to return to the Internet Filter screen.
6
Set the days when access will be filtered. Keep the default
setting, Everyday, or select the appropriate days of the week.
7
Set the time when access will be filtered. Keep the default
setting, 24 Hours, or check the box next to From and use the
drop-down boxes to designate a specific time period.
IMPORTANT! Access for the listed PCs is controlled during the
selected days and times. Any blocked services or websites are
blocked at all times.
8
In the Blocking Services drop-down boxes, select the services
you want to block (the default setting is None). In the Blocking
Services fields, the range of ports for this service will appear. If
ViewSonic Wireless Router 42