ViewSonic WR100 User Manual page 22

3
The Primary Setup screen:
Host Name: if requested by your ISP (usually cable
ISPs). Otherwise, leave this field blank.
Domain Name: if required by your ISP. Otherwise, leave
this field blank.
Connection Type: Click the down arrow for a drop-down
menu with several Connection Types. IMPORTANT! The
Primary Setup screen displays different features
depending on which Connection Type you select. Select
one of the following:
• Dynamic IP Setting - DHCP (Automatic
Configuration). If you are connecting through DHCP or
a dynamic IP address from your ISP, keep this default
setting.
• Static IP Address. If your ISP assigns you a Static IP
Address, select Static IP Address. More fields appear
below Connection Type. Enter the Internet IP Address,
Subnet Mask, Default Gateway, and enter at least one
DNS address.
• PPPoE (for DSL). If you are connecting through
PPPoE, select PPPoE from the drop-down menu.
Complete the User Name and Password fields.
ViewSonic Wireless Router
Continued.....
Goes to the screen to select one of
the following Security modes:
- WEP
- WPA Pre-Shared
- WPA Radius
18