Advertisement
Tx1000 MK2
The system is available in four main variants:
1. TX1000/8 MK2 8 camera inputs and 2 monitor outputs.
2. TX1000/16 MK2 16 camera inputs and 2 monitor outputs.
3. TX1000/8A MK2 8 camera inputs, 2 monitor outputs and 16 alarm inputs.
4. TX1000/16A MK2 16 camera inputs, 2 monitor outputs and 16 alarm inputs.
Options are available to allow control of 64 cameras using single keyboard and an EX-4 MK2 keyboard
expander. Please contact BBV for further information.
All variants allow the use of two fully independent keypads.
The transmitter is a two-part design: the base unit, which is wall- or rack-mounting; and the keypad which is
connected by a video cable and a bi-directional RS232 link running at 9600 baud, No parity, 8 data bits and
1 stop bit.
INTRODUCTION
The BBV Tx1000 MK2 Series transmitters are very simple to use in multi-camera CCTV systems. They are
easily installed into either a new or an existing system.
Up-the-coax telemetry allows upgrading of static cameras to PTZ without the need for additional cabling.
BBV RS422 telemetry is available as standard where up-the-coax telemetry is not suitable on not required
and in addition an optional 20mA twisted pair unit can be retro fitted to the TX1000 Mk2 for complete
compatibility with existing TX1000 sites.
Tx300-400-1000MK2-1000 Keypad-Ex4 MK2-TxLD Installation Guide 12Jan05.doc
Page 14
Tx1000 MK2 (8/16 camera controller)
Advertisement
