Daily Maintenance Checklist - Toro Reelmaster 3555 Operator's Manual

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the safety interlock
operation.
Check the brake operation.
Check the engine-oil level.
Check the cooling system
fluid level.
Drain the water/fuel
separator.
Check the air filter, dust cup,
and burp valve.
Check for unusual engine
noises. 1
Check the radiator/oil cooler
for debris.
Check for unusual operating
noises.
Check the hydraulic-fluid
level.
Check the hydraulic hoses
for damage.
Check for fluid leaks.
Check the fuel level.
Check the tire pressure.
Check the instrument
operation.
Check the height-of-cut
adjustment.
Lubricate all the grease
fittings. 2
Touch-up any damaged
paint.
1 Check the glow plug and injector nozzles if starting is hard, there is excess smoke, or rough running is noted.
2 Immediately after every washing, regardless of the interval listed.
Important:
Refer to your engine operator's manual for additional maintenance procedures.
Note:
To obtain an electrical schematic or a hydraulic schematic for your machine, visit www.Toro.com.
Notation for Areas of Concern
Inspection performed by:
Item
For the week of:
Mon. Tues. Wed. Thurs.
Date Information
36
Fri. Sat. Sun.