Connecting The Appliance To A Wlan Home Network (Wi-Fi) With Wps Function; Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Function - Siemens K IS H Series User Manual

en Home Connect
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 7
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
automatically.
Press .
1.
a The temperature display (refriger-
ator compartment) shows
Press / (Refrigerator compart-
2.
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows
ure display (freezer compartment)
shows .
Press / (Freezer compartment).
3.
a The temperature display (freezer
compartment) shows an animation
for two minutes. The appliance is
ready for automatic connection to
the WLAN home network (Wi-Fi).
22
.
and the temperat-
Activate the WPS function on the
4.
router during this period.
To do this, take note of the inform-
ation in the documents for your
router.
a Once successfully connected,
flashes in the temperature dis-
play (freezer compartment).
If the temperature indicator (freezer
5.
compartment) shows
ance was unable to establish a
connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is
‒
located within the range of the
WLAN home network (Wi-Fi).
→ "Checking the signal
strength", Page 24
Repeat the process or establish
‒
the connection manually
→ Page 22.
Connect the appliance to the
6.
Home Connect app. → Page 23
Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
briefly sets up its own WLAN net-
work. You can connect a mobile
device to the WLAN network and
transfer the network information for
the WLAN home network (Wi-Fi) to
your appliance.
Requirement: The Home Con-
nect app has been installed on your
mobile device.
Press .
1.
a The temperature display (refriger-
ator compartment) shows
, the appli-
.