Setting Up Home Connect; Switching On The Con- Nection To The Wlan Home Network (Wi-Fi); Switching Off The Con- Nection To The Wlan Home Network (Wi-Fi); Installing Updates For The Home Connect Software - Siemens KG N Series User Manual

en Home Connect
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up Home Con-
nect
Requirements
¡ The mobile device supports the
Bluetooth standard 4.2 or higher.
¡ The Home Connect app has been
installed on your mobile device.
Scan the QR code using the
1.
Home Connect app.
Follow the instructions in the
2.
Home Connect app.
10.2 Switching on the con-
nection to the WLAN
home network (Wi-Fi)
Press .
▶
10.3 Switching off the con-
nection to the WLAN
home network (Wi-Fi)
Press .
▶
10.4 Installing updates for the
Home Connect software
Note: If an update of the Home Con-
nect software is available, a message
appears in the Home Connect app.
20
To install the update for the
▶
Home Connect software, follow the
instructions in the Home Connect
app.
a The control panel is partially
locked during the installation.
10.5 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
Press and hold
▶
until goes out.
a The Home Connect settings have
been reset.
10.6 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
for six seconds