System Self Test - Sony SAT-W60 Service Manual

SELF TEST:
1. From home page go to [settings].
2. Go to [system test].
a. Connect a phone line to the phone jack on the back of the unit.
b. Connect both tuners to a SAT signal.
c. Make sure that the CAM card is in.
3. Press [Run Test].
This test checks both tuner's signal and that the modem detects a dial tone. Also, it checks that the CAM card is inserted and valid. Test
will show the serial number on the card.
4. Go to [Receiver Info] from the same system test menu.
This provides the following information on the box:
• Manufacturer: Sony Model number:
• Serial number:
• Client software:
• Boot rom version:
• SSID:
5. To show the date the box was last upgraded along with the version, select [Upgrades] from the SAT receiver information menu.
6. Go to the settings menu and select [Hooking Up]
7. Go to [Signal Strength]
This will show the signal strength for each tuner. It is also possible to change transponder numbers to verify both even and odd
transponders.
SECTION 3

SYSTEM SELF TEST

— 11 —
SAT-W60