Yamaha YFA1S Assembly Manual page 11

EBA00011
NOTE:
_
Check the following items again after setup and predelivery service have been completed.
A: INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
Ã
Front wheels
Ã
Rear wheels
Ã
Handlebar
Ã
Throttle housing
Ã
Front brake cable
Ã
Rear brake cable
Ã
Headlight
Ã
Cable ties (handlebar)
Ã
Handlebar cover
Ã
Fuel tank breather hose
Ã
Front bumper
Ã
Front panel
B:TIGHTENING TORQUE OF EACH PART
Ã
Front wheel and front wheel hub
Ã
Rear wheel hub and rear axle
Ã
Handlebar holder and steering column
Ã
Throttle housing and bracket
Ã
Headlight and steering column
Ã
Front bumper and frame
Ã
Front panel and frame (bolt)
Ã
Front panel and frame (screw)
Ã
Rear bumper and frame
Ã
Rear bumper and tail/brake light bracket
Ã
Tail/brake light lens unit and tail/brake light bracket 7 Nm (0.7 m · kg, 5.1 ft · lb)
Ã
Rear fender flap and rear fender
Ã
Fender stay and frame
Ã
Fender stay and rear fender
Ã
Swingarm guard and swingarm
C: ROUTING OF WIRE, CABLES, ETC.
Ã
Throttle cable
Ã
Front brake cable
Ã
Rear brake cable
Ã
Headlight leads
Ã
Handlebar switch lead
Ã
Front brake light switch lead
YFA1S
SETUP AND PREDELIVERY CHECKLIST
Ã
Rear bumper
Ã
Tail/brake light lens unit
Ã
Rear fender flaps
Ã
Fender stays
Ã
Swingarm guard
Ã
Owner's tool kit
Ã
Owner's manual
Ã
Battery
Ã
Seat
Ã
Front reflectors
Ã
Rear reflectors
55 Nm (5.5 m · kg, 40 ft · lb)
120 Nm (12 m · kg, 85 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
4 Nm (0.4 m · kg, 2.9 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
Ã
Rear brake light switch lead
Ã
Fuel tank breather hose
Ã
Tail/brake light lead
Ã
Battery breather hose
Ã
Battery positive lead
Ã
Battery negative lead
–7–