Setting The Timer - Ariston FA3S 841 P IX A AUS Daily Reference Manual

alternately with the remaining time.
.

SETTING THE TIMER

This option does not interrupt or program cooking
but allows you to use the display as a timer, either
during while a function is active or when the oven is
off.
Keep pressing until the
"00:00" start flashing on the display.
Use or to set the time you require and press
to confirm. An audible signal will sound once the
timer has finished counting down the selected time.
Notes: To cancel the timer, keep pressing
starts flashing, then use
and "00:00" icon and
until the
to reset the time to "00:00".
.
AUTOMATIC CLEANING FUNCTION – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories - including shelf guides - from
the oven before activating the function. If the oven is
installed below a hob, make sure that all the burners
or electric hotplates are switched off while running
the selfcleaning cycle.
For optimum cleaning results, remove the worst
soiling with a damp sponge before using the Pyro
function.
Avoid activating the pyro cycle cleaning in the
presence of limescale residues.
icon
We recommend only running the Pyro function if
the appliance contains heavy soiling or gives off bad
odours during cooking.
To activate the automatic cleaning function, turn the
selection knob and the thermostat knob to the
The function will be activated automatically, the door
locked and the light inside the oven switched off:
The display will show the time remaining to the end,
alternating with "Piro".
Once the cycle has been completed, the door remains
locked until the temperature inside the oven has
returned to a safe level. Air the room during and after
running the Pyro cycle.
EN
icon.
5