Juniper T320 Replacing Manual page 6

6
Installing a Front T320 Air Filter
temporary fasteners so that they are not supporting their own weight as they
hang from the connector.
CAUTION: Do not let fiber-optic cable hang free from the connector. Do not allow
fastened loops of cable to dangle, which stresses the cable at the fastening point.
Simultaneously pull the two releases on the cable management system. Lift it
3.
up and outward to lock it in place to access the air filter.
Loosen the captive screws on the corners of the air filter faceplate.
4.
Grasp the handles and pull the air filter straight out of the chassis.
5.
Remove the filter element from the air filter frame (see Figure 6).
6.
Figure 5: Removing the Front Air Filter
Figure 6: Replacing the Front Filter Element
Installing a Front T320 Air Filter
To install the front air filter (see Figure 7):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and
1.
connect the strap to one of the ESD points on the chassis.
Insert the filter element into the air filter frame.
2.