Adjusting The Shock Absorber Assembly - Yamaha YZ65 Owner's Manual

Instrument and control functions
1
1. Bleed screw
5. Wait a few seconds, and then in-
stall the bleed screws.
4
6. Install the protector.
Adjusting the shock absorber
1
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing nut, a rebound damping force ad-
justing screw and a compression
damping force adjusting screw.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
Adjust the spring preload as follows.
1. Remove the seat. (See page 4-8.)
2. Loosen the clamp bolt.
1. Clamp bolt
3. Remove the bolts, and then take
the panels off.
1
1. Bolt
2. Panel
4-12
EAU84212
ECA10102
1
2