Adjusting The Front Fork - Yamaha YZ65 Owner's Manual

2
1
2
1. Slot
2. Projection
3. Seat holder
2. Make sure the seat is in its original
position.
3. Install the bolt at the rear of the
seat.
TIP
 When removing and installing the
seat, be careful not to damage the
seat with a tool.
 Make sure that the seat is properly
secured before riding.
Instrument and control functions
3
4-9

Adjusting the front fork

WARNING
Always adjust both fork legs equally,
otherwise poor handling and loss of
stability may result.
This front fork is equipped with re-
bound damping force adjusting screws
and compression damping force ad-
justing screws.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Rebound damping force
1. Remove the protector.
1
1. Protector
2. Turn the adjusting screw in direc-
tion (a) to increase the rebound
damping force. Turn the adjusting
screw in direction (b) to decrease
the rebound damping force. To
set the rebound damping force,
turn the adjuster in direction (a)
until it stops, and then count the
clicks in direction (b).
EAU84383
EWA10181
ECA10102
4