Table of Contents
Advertisement
4
Click [OK].
● ● ● ● Windows
®
2000
5
A message indicating that the device can be safely removed appears. Click [OK].
6
Disconnect the USB cable.
7
Set the Power Switch on the camcorder to "OFF".
The camcorder turns off.
Connections (Macintosh)
Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use
ImageMixer in capturing video in real time.
Camcorder
1
To assure safety, make sure all units are turned off before making any connections.
2
Use the USB cable to connect the camcorder to the PC.
● We recommend that you use the AC Adapter.
NOTES:
● When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY
mode on the camcorder causes malfunctions of the PC.
● If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the
PC, not through the hub.
● Do not use an extension USB cable.
To USB
connector
USB cable
— 13 —
● ● ● ● Windows
®
Me
To USB
connector
PC
Advertisement
Table of Contents
