Table of Contents
Advertisement
11
Enter the Macintosh Administrator name
and password in [Name] and [Password]
respectively, and click [OK].
Finish Up screen appears.
If you are not the owner, this screen will not be
appeared.
12
Click [Close] after you will confirm the
message that tells you the installation has
been completed.
13
Click [Close] when the installation is
finished and eject the CD-ROM.
Connections (Macintosh)
Connect the USB cable to copy still images and
video files in a recording medium to the PC.
Camera
1
To assure safety, make sure all units are
turned off before making any connections.
2
Use the USB cable to connect the camera
to the PC.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
Connect the camera directly to the PC, not through
the hub.
Do not use an extension USB cable.
– 28 –
PC
To USB connector
USB cable
To USB connector
Advertisement
Table of Contents
