Chapter 3: Electrical And Idos Operations; Introduction; Measure And Source Operations; Procedure Overview - GE Druck DPI 620 User Manual

3.1 Introduction

3.2 Measure and
source operations

3.2.1 Procedure overview

2
1
TAP
A
B
C
[EN] English - K0449
Chapter 3: Electrical and IDOS
This section gives examples of how to connect and use the
instrument for these operations:
•
to measure and source electrical values
•
to measure the pressure with an IDOS module
Before you start:
•
Read and understand the
•
Do not use a damaged instrument.
Note: Use only original parts supplied by the manufacturer.
When you first use the calibrator, there are default
measure and source
Section 2.10.3.
To use the calibrator, complete these procedures:
•
Set the calibrator functions you want to use on the display:
item ; see Section
A
a. CH1: Channel 1 electrical function (measure or source)
b. CH2: Channel 2 electrical function (measure or source)
c. Pressure function (P1 and/or P2): for the MC 620 module
carrier, see Chapter
(P1 only), refer to user manual - K0457
d. IDOS function: to measure pressure with an IDOS
universal pressure module (UPM), see
e. other functions (maximum: 6 functions)
•
If necessary, change the Units for the function: item
see Section 2.10.5
•
If necessary, set a Utility for the function: item
Section 2.10.6
a. Max/Min/Avg
b. Switch Test
c. Leak Test (pressure options only)
operations
"Safety" section.
functions on the display; see
2.10.3. This includes:
4; for the PV 62x pressure stations
Section 3.3
Electrical and IDOS operations 3-1
B ;
; see
C