Set The Process Options (Measure) - GE Druck DPI 620 User Manual

2.11.1 Set the Process options (measure
1
TAP
Alarm:
1
Alarm state
[EN] English - K0449
c. Pressure operations with a PV 62x pressure station (refer
to the user manual - K0457)
Note: Section 2.9 (Display operation)
change the values on the display.
Tare
Use Tare to set a temporary value for zero. This makes an
adjustment to all subsequent readings on the display.
3
2
Home: Back to start
The alarm includes a "beep" sound if Audio is set
(Section 2.10.1).
3
2
Home: Back to start
)
Set On or Off
Set the tare to the reading on the display.
Shows the stored tare value. Tap it to set
another value.
Previous: Back one display
Set On or Off
*Set the low alarm value
*Set the high alarm value
*Default (low/high) = Range limits
Previous: Back one display
Issue 1
shows how to set and
Prepare the instrument 2-13