Altering The Buttonhole Width; Altering The Buttonhole Density - Janome 5300QDC Instruction Book

n
m
!3
,
q
–
q
–
y
!4
+
+
n
automatically with the needle in the up position.
m
buttonhole lever upward as far as it will go.
y Buttonhole lever
,
bartack to prevent accidentally cutting the stitches.
Cut the opening with the seam ripper.
!3 Pin
!4
Double layer buttonhole
To make a sturdy buttonhole, sew another layer of
buttonhole stitches over the previous stitches.
buttonhole lever, simply start the machine again.
NOTE:
If the fabric is not feeding smoothly when sewing
a double layer buttonhole, increase the buttonhole
density.

Altering the buttonhole width

increase the buttonhole width.
decrease the buttonhole width.
q
NOTE:

Altering the buttonhole density

decrease the buttonhole density.
increase the buttonhole density.
q
NOTE:
39