Front Panel - Vertex Standard VX-4100 Series Operating Manual

Front Panel

- All buttons located on the Front Panel are Programmable Function (PF)
Buttons, configured according to your network requirements and programmed by
your VERTEX STANDARD dealer. The instructions below discribe a typically-con-
figured radio.
VOL Knob
Turn this control clockwise to increase the volume.
Microphone Jack
Connect the microphone plug to this jack.
Emergency Microphone
The emergency microphone is located behind this small slit. When the emer-
gency feature is activated, this microphone is enabled.
[ ], [ ], [ ] Buttons (Programmable Function Buttons)
These buttons can be set up for special applications, such as High/Low power
selection, Monitor, Talk-Around, etc., as determined by your network require-
ments and programmed by your VERTEX STANDARD dealer.
( POWER ) Button
Press and hold in this button for 2 seconds to toggle the transceiver's power "on"
and "off."
2
C
P1
TX/BUSY
1 2
A
& C
P2
3 4
VX-4100 S O M