Advertisement
Installation
Unpacking
• This product has been packaged to protect it against transportation damage.
Unpack the appliance but keep all packaging materials until you have made sure
your new washing machine is undamaged and in good working order. The carton is
recyclable. Whenever possible, reuse the carton and recycle it when disposing of
the packaging materials.
• CAUTION!
children, so ensure all packaging materials are out of their reach. Dispose of any
plastic wrapping safely.
• Unwind the power cord to its full length and inspect it for damage. Do not use
the appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact our after sales support line for advice on
examination, repair or return of the damaged
product.
• Read this manual to familiarise yourself with all
the parts and operating principles of the washing
machine. Pay particular attention to the safety
instructions on the previous pages.
• Ensure the washing machine is lifted off the foam
base, as illustrated on the right.
Installing the base cover
• Make sure the power cord is unplugged from the mains supply.
• Place some padding (such as a soft mat, blanket or thick towel) on the floor and
gently lay the washing machine on the padding, back side down. Take care not to
dent the housing.
• Insert the base cover into the grooves on the underside of the washing machine,
then secure the base cover by tightening the screw in the centre screw hole, as
illustrated below.
• Carefully set the washer upright.
8
(AU) 1300 886 649 (NZ) 0800 836 761 |
Plastic wrapping can be a suffocation hazard for babies and young
After Sales Support
Foam base
info@tempo.org
Hide quick links:
Advertisement
