First Time Installation; Navigating The Analogue Tv Menu System; Analogue Tv Menu System; Picture Menu - JVC LT-32R15BU Instructions Manual

Wide lcd panel tv
Table of Contents

Advertisement

First Time Installation

When the TV set is operated for the fi rst time, the
following menu screen will be displayed:
Select your Country, Language and Text
language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue.
To cancel, press the BLUE button.
The following menu will be displayed during the
automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Do not turn off the TV while initializing fi rs time installation.
Navigating the Analogue TV
Menu System
• Press "MENU" to display the main menu.
• Press " " or " " button to select an icon.
• Use " " or " " button to highlight.
• Press " " or " " buttons to change the settings.
• Press " " for more options.
• Press OK to store.
• To exit the menu or return from sub-menu
screen, press "MENU".
Note: These explanations are valid for the navigation
of the analogue TV menu system. To select options
that are explained in the following parts, refer to

"Navigating the Analogue TV Menu System".

Analogue TV Menu System

Picture Menu

Mode
For your viewing requirements, you can set the
related mode option.
Press " " or " " button to select Mode. Press
" " or " " button to choose from one of these
options: Cinema, Dynamic and Natural.
Brightness/Contrast/Colour/Sharpness/
Hue
Press " " or " " button to select the desired
option. Press " " or " " button to set the level.
Note: Hue option can only be visible when the TV
receives an NTSC signal.
Colour Temp
Press " " or " " button to select Colour Temp.
Press " " or " " to choose from one of these
options: Cool, Normal and Warm.
Note:
• Setting Cool option gives white colours a slight
blue stress.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.
English - 19 -

Advertisement

Table of Contents
loading

Table of Contents