Table of Contents
Advertisement
Inserting Batteries in the
Remote Control Handset
• Remove the battery cover located on the back
of the handset by gently pulling backwards
from the indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions
and replace the battery cover.
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries.
Batteries should not be exposed to excessive
heat such as sunshine, fi re or the like.
Operating Range for the
Remote Control
• Point the top of the remote control toward the
LCD TV's remote sensor LED while pressing
a button.
Remote range is approximately 7m/23ft.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC
50 Hz.
• Switch the "
will switch on and the LED lights up.
Note: If the TV is in standby mode, the LED will not
light up.
• To switch on the TV from standby mode
either:
• Press the "
button on the remote control.
• Press the
The TV will then switch on.
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the "
illustrated, (
• To power down the TV completely, unplug
the power cord from the mains socket.
Changing the Direction of TV
You can move the direction of TV to change the
viewing angle. Support both the TV`s stand and
side by to move the TV left or right .
Note: Support the TV by the stand while changing
the direction.
English - 17 -
" button to position "|" so the TV
" button,
/
or a numeric
or
button on the TV.
" button to position 2 as
) so the TV will switch OFF.
Advertisement
Table of Contents
