Care And Maintenance; Routine Maintenance; Cleaning Your Carry On Scooter - Golden Technologies Buzzaround Carry On GB120 Owner's Manual

ROUTINE MAINTENANCE

Your scooter requires a minimal amount of care and maintenance. If you do not feel
confident in your ability to perform the maintenance listed below, you can schedule an
inspection and maintenance with your provider.
✓ Make sure your battery pack is fully charged daily. See "Battery Charging".
✓ Regularly inspect your scooter's tires for signs of wear.
✓ Regularly inspect all exposed harnessing and connections for wear, damage, and
corrosion. Have your provider repair or replace any damaged harness or connector.
✓ Periodically check all fasteners for tightness, wear, and corrosion. If any of these are
present, turn off the scooter and contact your provider.
Be careful of pinch points and sharp metal parts (wear gloves).
✓ Keep all the electrical components (charger, control panel, and electronics) free from
moisture. If any of these items do become exposed to moisture, let them dry
thoroughly before attempting to operate your scooter again.
✓ All bearings are permanently lubricated and sealed. No additional lubrication is
required.
CLEANING YOUR Carry On
Tires
Clean the tires with ordinary kitchen-type cleaners and a damp cloth. Do not use
solvents on the tires. Solvents can cause the tire material to break down or become too
soft.
Body
The main body and the control panel of your scooter are formed ABS plastic for style and
durability. Each Carry On comes standard with removable color panels in (Red, Blue,
Green, White. and Orange). Color panels can be changed easily by removing two screws
for each panel.
Do not use excess water or pressure when cleaning your scooter.
• Never take your scooter through a car wash.
• Never use a high pressure hose to wash your scooter.
• Use cool water mixed with a mild soap to remove dirt and oils.
• Dry with a clean soft cloth.
• Buff by hand with a soft cloth.
• Do not use a sharp object when removing shroud pieces.
• Clean the body of your scooter with a damp cloth.
Vinyl Seat
Clean with a mild soap or mild detergent and a damp cloth. A vinyl cleaner may also be
used.
Never use Armor All type products on the floor, seat, or tires of your
scooter. These types of cleaners cause the surface being treated to become very
slippery, causing a potential slip/fall hazard.
X. CARE AND MAINTENANCE
29