Golden Technologies Buzzaround Carry On GB120 Owner's Manual page 17

V. OPERATION
DC Battery Voltage Meter
This meter (see figure 5) shows the amount of voltage in your Carry On's battery pack.
• Green indicates a full charge on the battery pack.
• Yellow indicates caution and approximately a one-half charge of the battery pack.
• Red indicates that the battery pack has less than one-half of a charge remaining.
See section X. "Care and Maintenance" for instruction concerning charging the battery
pack.
Throttle Control Lever
This lever operates both the speed and the direction of the Carry On. This self-centering
lever system controls your Carry On's speed (up to the maximum speed set by the speed
adjustment dial) and its forward and reverse direction. See figure 5.
To drive forward:
• Use your right hand fingers to pull back on the right side of the throttle control lever.
Always bring your Carry On to a full stop before changing direction from
forward to reverse, or from reverse to forward.
To drive in reverse use either of the following:
• Use your left hand fingers to pull back on the left side of the throttle control lever.
When the throttle control lever is completely released, it automatically returns to the
center "stop" position and engages your scooter's brakes, bringing you to a complete
stop. You will hear a "click" when the park brake engages.
Control Options
Golden Technologies, Inc. has made provision for the individual needs and abilities of the
operators of the Golden Carry On.
Your authorized Golden Technologies, Inc. provider can reverse the throttle control lever
controls so that when you pull on the left side of the lever, your scooter will move in the
forward direction, and when you pull on the right side of the lever your scooter will move
in the reverse direction.
TILLER ADJUSTMENT
The tiller on your Carry On scooter employs an adjustment lever to provide you with
infinite tiller angle settings. To set the tiller to your liking, follow these directions.
1. Use one hand to grasp a handgrip.
2. Use your other hand to squeeze the tiller adjustment lever. See figure 4 on page 14.
3. While squeezing the lever, position the tiller to a comfortable driving position.
4. Release the tiller adjustment lever.
17