Editing Multi Pads - Yamaha PSR-SX600 Reference Manual

13
Press the [EXIT] button to close the Repeat/Chord Match setting window.
14
Press the [7 ] (Name) button to name the recorded Multi Pad.
15
If you want to record other Multi Pads, repeat steps 4–14.
16
Press the [8 ] (Save) button to save the Multi Pad data as a Bank containing a set
of four Pads.
For details, refer to "Basic Operations" in the Owner's Manual.
NOTICE
The recorded data will be lost if you turn off the power to the instrument without carrying out the Save operation.

Editing Multi Pads

You can manage (rename, copy, paste and delete) your created Multi Pad Bank and each of the Multi Pads
belonging to the Bank. For instructions on managing the Multi Pad Bank file, refer to "Basic Operations" in
the Owner's Manual. This section covers how to manage each Multi Pad.
1
Select the Multi Pad Bank containing the Multi Pad to be edited.
1-1
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank Selection
display.
1-2
Use the TAB [E][F] buttons to select the tab "Preset," "User" or "USB" (when a USB flash
drive is connected), to which the desired Multi Pad is saved.
1-3
Select a Multi Pad Bank by using the Cursor buttons [][][E][F], then press the [ENTER]
button.
6
2
Press the [7 ] (Edit) button of Menu1 to call up the Multi Pad Edit display.
3
Select a particular Multi Pad to be edited by using the Cursor buttons [][][E][F],
then press the [ENTER] button.
NEXT PAGE
74
PSR-SX600 Reference Manual