Installing The Heatsink Assembly-Uma - Dell Latitude 5411 Service Manual

Steps
1. Locate the heatsink assembly on your computer.
2. Remove the six (M2x3) screws that secure the heatsink assembly to the computer.
NOTE: Remove the screws as per the callout on the heatsink module.
3. Disconnect the heatsink fan cable from the system board.
4. Lift the heatsink assembly out of the computer.
5. Remove the single (M2x3) screw that secures the heatsink fan to the heatsink.
6. Lift the heatsink fan away from the heatsink.

Installing the heatsink assembly-UMA

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the heatsink and provides a visual representation of the installation procedure.
32 Disassembly and reassembly